Tel: 0116 251 6487
Mon to Fri: 8.30am to 5pm

Mira Assist Plus Chrome Bath Shower Mixer Tap With Slide Rail Kit

Mira Shower Logo
No Rating No Rating Write a Review
Rate This:
MFC Code : 1.1900.028
Product Code : 61498
Delivery: £34.95
£280.51
RRP : £361.15

Mira Assist Plus Chrome Bath Shower Mixer Tap With Slide Rail Kit

Read More About the Product

qty :
Check Availability 4 Working Days Apprx

About This Product

  • The manufacturing code of this product is 1.1900.028
  • It comes in a chrome finish
  • Width of tap: 300mm (30cm)
  • Inlet Centres: 180mm (18cm)
  • Height of Slide bar: 560mm (56cm)
  • One spray 90mm hand shower
  • 1750mm (175cm) flexible shower hose
  • Installation: Deck-mounted
  • supplied with rub clean nozzles
  • Bath Shower Mixer supplied with slide bar with adjustable fixing centres (400 - 520 mm)
  • Thermostatic temperature stability
  • Standard deck mount, easy-fit elbows and integrated supply isolation
  • Compatible with all systems, even at low pressure
  • Simple lever handles are easy to grip and easy to use
  • Deck mount elbows allow bath-edge installation
  • Separate flow and temperature controls
  • Temperature control has a maximum temperature stop for increased safety (with an override for a hotter bath)
  • Mira Cool Shield™ to ensure the valve doesn’t get hot to the touch during use
  • Temperature control type: Thermostatic
  • Flow control type: Ceramic
  • Temperature stability: ± 2°C
  • Deck mounted easy fit elbows support 2nd fix valve installation
  • Standard 180 mm centres for the replacements of existing Bath Shower Mixers
  • Inlet connections: 3/4inch BSP male under bath connections to pipework; 3/4inch BSP connection to a mixer shower
  • Automatic shut down: Shut down within 2 seconds to comply with TMV2 requirements
  • Factory set to safe max temp: 39°C at maximum temperature stop, 46°C using override
  • Adjustable maximum temperature for on-site conditions
  • Flow rate: 15 l/min at 0.6 bar (at bath outlet) and 9 l/min at 0.5 bar (at handset)
  • Flow regulator: 6 l/min (for handset only) supplied with the product
  • Cold water range: 1°C to 25°C
  • Hot water range: Min 55°C; 60°C - 65°C (recommended)
  • Minimum maintained pressure (gas water heater) 1 bar (10-metre head)
  • Minimum maintained pressure (gravity system): 0.1 bar (1-metre head)
  • Maximum maintained pressure: 5.0 bar (50-metre head)
  • Maximum static pressure: 10.0 bar (100-metre head)
  • Download the Datasheet PDF File from the Technical Info Section
  • Refer to the technical drawing for more details
  • Warranty: Five-year from Mira against manufacturing defects
  • Integrated bi-directional 1/4 turn full-bore ball valve isolators:
  • Saves time and resources when conducting in-service cold failure testing to comply with TMV 2
  • Saves time and resources for in-service maintenance (i.e cleaning filters and not having to remove bath panel)
  • No specialist tools required: Easily isolate the water supply using a flathead screwdriver or hex key
  • Product Approvals:
  • KIWA UK approved product
  • WRAS approved (Water Regulations Advisory Scheme)
  • TMV2 approved product

Information Breakdown

Colour Chrome
Warranty/Guarantee 5 Years
Theme Modern
Height 560
Compliance/Approvals/Standard KIWA-UK | WRAS | TMV2
Inlet Connections 3/4inch
Hose Included Yes
Hose Length 1750
Configuration Slide Rail | Hand Shower | Hose
Riser Rail & Kit Finish Chrome
Handset Included Yes
Rail Length 520
Adjustable Height Yes
Minimum Operating Pressure (Bar) 0.5

Technical Info


You May Also Require

Questions & Answers