Tel: 0116 251 6487
Mon to Fri: 8.30am to 5pm

Mira React Plus Deck Mounted Bath Filler Tap Chrome

Mira Shower Logo
No Rating No Rating Write a Review
Rate This:
MFC Code : 1.1900.026
Product Code : 61478
Delivery: £34.95
£224.29
RRP : £280.37

Mira React Plus Deck Mounted Bath Filler Tap Chrome.

Read More About the Product

qty :
Check Availability 5 Working Days Apprx

About This Product

  • Manufacturing code of this products: 1.1900.026
  • Finish: Chrome
  • Dimension: Width 300mm (30cm) x Depth 200mm (20cm)
  • Inlet centres: 180mm (18cm)
  • Installation: Deck mounted
  • Thermostatic temperature stability
  • Standard deck mount, easy fit elbows and integrated supply isolation
  • Compatible with all systems, even at low pressure
  • Separate flow and temperature controls
  • Deck mount elbows allow bath-edge installation
  • Temperature control has maximum temperature stop for increased safety (with override for a hotter bath)
  • Mira Cool Shield™ to ensure valve doesn’t get hot to touch during use
  • Deck mounted easy fit elbows, supports 2nd fix valve installation
  • Inlet connections: 3/4 inch BSP male under bath connections to pipework; 3/4 inch BSP connection to mixer shower
  • Integrated bi-directional 1/4 turn full-bore ball valve isolators:
  • Saves time and resources when conducting in service cold failure testing to comply with TMV 2
  • Saves time and resources for in service maintenance (i.e cleaning filters and not having to remove bath panel)
  • No specialist tools required: Easily isolate the water supply using a flat head screwdriver or hex key
  • Temperature control type: Thermostatic
  • Flow control type: Ceramic
  • Flow rate (at bath outlet): 15 l/min at 0.6 bar
  • Temperature stability: ± 2°C
  • Automatic shut down: Shut down within 2 seconds to comply with TMV2 requirements
  • Factory set to safe max temp: 39°C at maximum temperature stop, 46°C using override
  • Adjustable maximum temperature for on-site conditions
  • Cold water range: 1°C to 25°C
  • Hot water range: Min 55°C; 60°C - 65°C (recommended)
  • Minimum maintained pressure (gas water heater): 1 bar (10 metre head)
  • Minimum maintained pressure (gravity system): 0.1 bar (1 metre head)
  • Maximum maintained pressure: 5.0 bar (50 metre head)
  • Maximum static pressure: 10.0 bar (100 metre head)
  • Refer technical drawing for more details
  • Warranty: 5 years from Mira against manufacturing defects.
  • Products Approvals:
  • KIWA UK approved
  • WRAS approved (Water Regulations Advisory Scheme)
  • TMV2 approved.

Information Breakdown

Colour Chrome
Warranty/Guarantee 5 Years
Theme Modern
Width 300
No. of Tap Holes 236
Compliance/Approvals/Standard KIWA-UK | WRAS | TMV2
Valve Type 1/4 turn
Handle Style Knob
WRAS Approved Yes
Flow Rates (l/min) 15 l/min at 0.6 bar
Inlet Connections 3/4inch BSP Male
Valve Included Yes
Installation Type Deck Mounted
Minimum Operating Pressure (Bar) 0.1

You May Also Require

Questions & Answers