Tel: 0116 251 6487
Mon to Fri: 8.30am to 5pm

Geberit Monolith Sanitary Module For Wall Hung WC 1140mm High

Geberit Logo
No Rating No Rating Write a Review
Rate This:
MFC Code : 131.185.00.5
Product Code : 61355
Delivery: £7.95
£677.82
RRP : £1232.75

Geberit Monolith Sanitary Module For Wall Hung WC 1140mm High.

Read More About the Product

qty :
Check Availability 5-7 Working Days Apprx

About This Product

  • Manufacturing code of this product : 131.185.00.7
  • Size : Width 505mm (50.5cm) x Height 1140mm (114cm)
  • Thickness : 106mm (10.6cm)
  • Dual flush
  • Compensation of dimensional tolerances possible
  • Height-adjustable up : 70mm (7cm)
  • Fastening height WC ceramic appliance : 35 ± 1 cm
  • Cistern, fully insulated against condensation
  • Side cladding made of aluminium brushed
  • Self-supporting
  • Adjustable flush volume
  • Water supply connection on the rear centre
  • Water supply connection on the left/right possible with accessories
  • Water supply connection on the bottom
  • Flow pressure : 0.1-10 bar
  • Maximum operating temperature, water : 25 °C
  • Flush volume, factory setting : 6 and 3 l
  • Flush volume large, adjustment range : 4.5 / 6 l
  • Flush volume small : 3 l
  • Calculated flow rate : 0.11 l/s
  • Minimum flow pressure for calculated flow rate : 0.5 bar
  • Refer technical drawing for more specification
  • Please refer Care instruction PDF from below
  • Application Purposes :
  • For renovations, conversions and new buildings
  • For wall inlets with inlet height : 230mm (23cm)
  • For replacing low-level exposed cisterns
  • For replacing half-high level exposed cisterns
  • For replacing wall-hung WCs with close-coupled exposed cistern
  • For replacing wall-hung WCs with pressure flushing valve
  • For Geberit AquaClean WC complete solutions
  • For replacing wall-hung WCs with concealed cistern with maximum
  • Service opening height : 1090mm (109cm)
  • For connecting Geberit AquaClean WC enhancement solutions, with
  • accessories
  • For mounting on finished floors
  • For installation in front of drywalls or solid walls
  • For compensating the offset between WC connections and wall drains using a stepped straight connector for wall-hung WCs
  • Scope Of Delivery :
  • Water supply connection set with 2 angle stop valves, 1/2inch
  • Flush bend extension 160mm
  • Sleeve made of EPDM Ø44 / 55mm (Ø4.4cm / 5.5cm)
  • Straight connector made of PE-HD Ø90mm (Ø9cm)
  • Adaptor socket made of PE-HD, Ø90 / 110mm (Ø9 / 11cm)
  • 2x threaded rods M12
  • Base cover
  • 6x fastening pins
  • Support frame
  • Fastening material for drywall
  • Fastening material for installation in front of concealed cisterns
  • Fastening material.

You May Also Require

Questions & Answers