Tel: 0116 251 6487
Mon to Fri: 8.30am to 5pm

Geberit Monolith Sanitary Module For Wall Hung WC 1010mm High

Geberit Logo
No Rating No Rating Write a Review
Rate This:
MFC Code : 131.185.00.5
Product Code : 61354
Delivery: £7.95
£703.56
RRP : £1114.44

Geberit Monolith Sanitary Module For Wall Hung WC 1010mm High.

Read More About the Product

qty :
Check Availability 5-7 Working Days Apprx

About This Product

  • Manufacturing code of this product : 131.185.00.5
  • Size : Width 480mm (48cm) x Height 1010mm (101cm)
  • Thickness : 106mm (10.6cm)
  • Dual Flush
  • Compensation of dimensional tolerances possible
  • Height-adjustable : 70mm (7cm)
  • Fastening height WC ceramic appliance : 350 to 10mm (35 to 1cm)
  • Cistern, fully insulated against condensation
  • Self-supporting
  • Adjustable flush volume
  • Water supply connection on the bottom
  • Water supply connection on the left/right possible with accessories
  • Flow pressure : 0.1-10 bar
  • Maximum operating temperature, water : 25 °C
  • Flush volume, factory setting : 6 and 3 l
  • Flush volume large, adjustment range : 4.5 / 6 l
  • Flush volume small : 3 l
  • Refer technical drawing for more specification
  • Please refer Care instruction PDF from below
  • Application Purposes :
  • For renovations, conversions and new buildings
  • For wall inlets with inlet height > 23 cm
  • For replacing low-level exposed cisterns
  • For replacing wall-hung WCs with close-coupled exposed cistern
  • For Geberit AquaClean WC complete solutions
  • For connecting Geberit AquaClean WC enhancement solutions, with
  • accessories
  • For mounting on finished floors
  • For installation in front of drywalls or solid walls
  • For compensating the offset between WC connections and wall drains
  • using a stepped straight connector for wall-hung WCs
  • Scope Of Delivery :
  • Water supply connection set with 2 angle stop valves, 1/2inch
  • Flush bend extension 160 mm
  • Sleeve made of EPDM, ø 44 / 55 mm
  • Straight connector made of PE-HD, ø 90 mm (9cm)
  • Adaptor socket made of PE-HD, ø 90 / 110 mm (9 / 11cm)
  • 2x threaded rods M12
  • Base cover
  • 6x fastening pins
  • Support frame
  • Fastening material for drywall
  • Fastening material.

You May Also Require

Questions & Answers