Grohe Rapido T Universal Concealed Thermostatic Mixer Valve

• Manufacturing code of this item : 35500000
• Thermostatic mixer valve for concealed installation (without finishing trim set)
  
• Concealed installation where space is limited, Rapido is the solution
  
• Innovative ultra-flat concealed solution (requires only 70mm installation depth it will fit into any wall
  
• Material : Body in DR brass
  
• Best suitable for use with bath-shower and central mixer valve trim
• Easy to install, premounted and tested unit
• Rapido T fitted with GROHE TurboStat® compact cartridge with wax thermoelement
• Top Outlets : 2 x 1/2 inch lockable
• Bottom Outlet: 2 x 1/2 inch (can only be used with separate stop valve)
• Built-in non return valves and dirt strainers
• Water Pressure : Min. recommended pressure for smooth operation is 1.0 bar (maximum pressure differential is 5:1)
• Watch online video about Rapido T from technical tab
  
• For complete dimension please refer technical drawing
• Download PDF for installation and aftercare instructions from technical tab
• Warranty: 5 years from GROHE against any manufacturing faults

Rapido T: Concealed bath and shower mixers lend a clean, modern look to a bathroom – where only the essential elements are on show. With its shallow installation depth and choice of single lever or thermostatic operation, Rapido is a universal solution that enables you to create your perfect  shower. Once installed, the concealed body is completed with a mixer trim set. The trim set can be chosen at a later stage as all designs are compatible with the concealed body. The concealed box comes as a complete ready-to-install unit with coded water inlet and outlet connections. So there’s no chance of it being installed incorrectly. The unit is 100% tested before it leaves our factory to ensure a lifetime of perfect and safe operation. For maximum showering enjoyment, GROHE Rapido T benefits from GROHE TurboStat® technology – for safety, comfort and water efficiency.

9 Easy Steps to Install Universal Concealed Valves GROHE Rapido:

• Mount the pipe couplings
  
• Line out the concealed valve - Mark drill holes - Drill the holes and mount the box
  
• Connect the pipes and isolate them - Check the connections - Flush the pipes
  
• Fill the space in the wall - Use the marker for the correct installation depth
  
• Cover the wall with tile adhesive - Place the collar and cover it also with tile adhesive
  
• Fit the tiles on the wall
  
• Remove the cap - Cut the shaft off
  
• Mount the Aqua Dimmer head part
  
• Mount the trim set.